The working principle of the photovoltaic tungsten-rhenium probe is mainly based on the measurement of voltage and current. The following are its specific working steps:
Preparation Phase
Select the appropriate type and specification of photovoltaic tungsten-rhenium probe, and determine the appropriate test location and method according to the type and size of the photovoltaic panel to be tested.
connection phase
To connect the photovoltaic tungsten-rhenium probe to the photovoltaic panel to be tested, you can use appropriate connection methods, such as clamps or direct contact.
measurement phase
Through the photovoltaic tungsten-rhenium probe, the voltage and current of the photovoltaic panel under test are measured.
analysis stage
Based on the measured voltage and current data, the performance and status of the photovoltaic panels are analyzed and evaluated.
end stage
Disconnect the photovoltaic tungsten-rhenium probe from the photovoltaic panel to be tested, organize the test data, and perform necessary recording and analysis.
It should be noted that the measurement accuracy and stability of the photovoltaic tungsten-rhenium probe have an important impact on its test results. Therefore, when measuring photovoltaic tungsten-rhenium probes, attention needs to be paid to selecting high-quality measuring equipment and performing necessary calibration and maintenance. At the same time, for different types of photovoltaic panels, it is necessary to select appropriate types and specifications of photovoltaic tungsten-rhenium probes to ensure the accuracy and reliability of measurement results.
More details of tungsten probes, please visit website: http://tungsten.com.cn/tungsten-needles-and-pins.html
Please contact CHINATUNGSTEN for inquiry and order of tungsten needles:
Email: sales@chinatungsten.com
Tel.: +86 592 5129595
