What are the Specific Contents of Safety Technical Specification for Ammonium Metatungstate Hydrate?

CTIA GROUP LTD

Safety Technical Specification for Ammonium Metatungstate Hydrate

 

  1. Chemical and enterprise identification

Product name: Ammonium metatungstate hydrate

CAS No.: 12333-11-8

Manufacturer: Chinatungsten Intelligent Technology Co.

Address:Siming District, Xiamen City, Fujian Province, China One of No.25, Wanghai Road, Phase II, Software Park, 3rd Floor Emergency Tel:+86 592 512 9696

 

  1. Hazard Overview

GHS Classification:

Health Hazard:

Acute toxicity (oral): Category 4

Acute toxicity (percutaneous): Category 4

Eye damage/irritation: category 1

Environmental Hazards:

Acute aquatic toxicity: category 1

Hazard Labeling:

Signal word: Hazard

Hazard type: corrosive

Warning symbol: exclamation point

 

III. Ingredient/composition information

Main ingredient: Ammonium metatungstate hydrate

CAS No.: 12333-11-8

Purity/Concentration: [Specific purity or concentration]

 

  1. First aid measures

Skin contact: Immediately remove contaminated clothing and rinse with plenty of running water. Seek medical attention.

EYE CONTACT: Immediately lift eyelids and rinse thoroughly with large amounts of running water or saline for at least 15 minutes. Seek medical attention.

INHALATION: Remove quickly from scene to fresh air. Keep airway open. If breathing is difficult, administer oxygen. If breathing stops, administer artificial respiration immediately. Seek medical attention.

Ingestion: Rinse mouth with water and give milk or egg white. Seek medical attention.

 

  1. Fire Fighting Measures

Fire extinguishing agent: Use water, foam, dry powder, carbon dioxide, sand to extinguish fire.

Fire extinguishing precautions: Firefighters must wear gas masks, full body fire suits, and extinguish the fire in the upwind direction.

 

Sixth, leakage emergency treatment

Emergency action: Isolate the leakage contaminated area and restrict access. It is recommended that emergency personnel wear dust masks (full face masks) and gas suits. Use clean shovels to collect in dry, clean, covered containers and transfer to a safe place. If a large number of leaks, collect and recycle or transport to a waste disposal site for disposal.

 

VII. Operation, Disposal and Storage

 

Precautions for operation

Closed operation, strengthen ventilation. Operators must be specially trained and strictly follow the operating procedures. It is recommended that operators wear self-absorbing filtering dust masks, chemical safety glasses, anti-poison penetration work clothes and rubber gloves. Keep away from fire and heat sources, and smoking is strictly prohibited in the workplace. Use explosion-proof ventilation system and equipment. Avoid contact with oxidizers and acids. Load and unload lightly when handling to prevent damage to packaging and containers. Equip with appropriate varieties and quantities of fire-fighting equipment and leakage emergency treatment equipment. Empty containers may retain harmful substances.

 

Storage Precautions

Store in a cool, ventilated warehouse. Keep away from fire and heat source. It should be stored separately from oxidizers and acids, and should never be mixed. The storage area should be equipped with suitable materials to shelter the leakage.

 

VIII. Exposure control and individual protection

Engineering control: Confined operation, strengthen ventilation.

Respiratory protection: When the concentration of dust in the air exceeds the standard, self-priming filtering dust masks must be worn. Air respirator should be worn when rescuing or evacuating from an emergency situation.

Eye protection: Wear chemical safety glasses.

Body protection: Wear anti-poison penetration work clothes.

Hand protection: Wear rubber gloves.

Other Protection: Smoking, eating and drinking are prohibited at the work site. Shower and dress after work. Maintain good hygienic habits.

 

  1. Physical and Chemical Characteristics

Appearance and character: white powder

Melting point (℃): melting point is 100℃.

Boiling point (℃): 338.519°C at 760 mmHg

Relative density (water=1): 2.3g/cm³

Solubility: 0.2%-0.4% , Ammonium metatungstate is easily soluble in water, and can react with hydrogen chloride, ether and other substances.

 

  1. Stability and reactivity

Stability: stable

Prohibited substances: oxidizing agents, acids

Conditions for avoiding contact: no specific conditions].

Polymerization hazard: non-polymerization

 

  1. Toxicological information

Acute toxicity: LD50: No specific data available

Irritation: irritating to skin and eyes

 

XII. Ecological information

Ecotoxicity: Harmful to aquatic organisms

Biodegradability: No specific data

Non-biodegradability: No specific data

 

XIII. Disposal

Nature of waste: Hazardous waste

Waste disposal method: Dispose of by safe burial method. Reuse containers where they can be utilized or dispose of them under the guidance of specialized personnel.

 

XIV. Transportation Information

Dangerous goods number:

UN No:

Package marking: corrosive goods

Packing category: Class II packaging

Packing Method: Plastic bag or two-layer kraft paper bag outside the full-open or medium-open steel drum; plastic bag or two-layer kraft paper bag outside the ordinary wooden box; threaded mouth glass bottle.

More details of ammonium metatungstate product, please visit website: http://ammonium-metatungstate.com/
Please contact CHINATUNGSTEN for inquiry and order of ammonium metatungstate:
Email: sales@chinatungsten.com
Tel.: 86 592 5129595

0