The solution hydrothermal synthesis of tungsten oxide nanoparticles can be prepared by the following steps:
Prepare Tungsten Source
Choose appropriate tungsten compounds as raw materials, such as tungstate, tungstate, etc. Make sure the tungsten source has good solubility.
Dissolved Tungsten Source
The tungsten source is dissolved in a suitable solvent, usually water. Dissolution can be assisted by stirring or heating to ensure that the tungsten source is evenly dispersed in the solution.
Add Reducing Agent
Add an appropriate amount of reducing agent, such as hydrogen or methanol, to the tungsten source solution. The role of the reducing agent is to reduce tungstate or tungstate ester to soluble tungstic acid species.
Ph Control
The pH of the solution is adjusted by adding an acid or base. Hydrothermal synthesis is usually performed under alkaline conditions to facilitate the formation of tungsten oxide nanoparticles. Adjustment of pH plays an important role in controlling particle size and morphology.
Hydrothermal
The tungsten source solution is placed in a high temperature and high pressure hydrothermal reactor for hydrothermal synthesis. The choice of temperature and pressure depends on the specific experimental requirements, generally between 100-200 °C and 10-50 atm.
Cooling And Dispersion
After the hydrothermal reaction was completed, the reaction system was cooled to room temperature. After cooling, the tungsten oxide nanoparticles can be uniformly dispersed in the solution using an appropriate dispersion method, such as ultrasonic treatment or mechanical stirring.
The solution prepared through the above steps contains uniformly dispersed tungsten oxide nanoparticles; the specific preparation conditions and steps may vary due to laboratory conditions and specific requirements of the required nanoparticles.
More details of tungsten oxide product, please visit website: tungsten-oxide.com
Please contact CHINATUNGSTEN for inquiry and order of tungsten oxide:
Email: sales@chinatungsten.com
Tel.: 86 592 5129595
