The following safety issues need to be paid attention to when using carbide saw blades:
- Protective equipment such as protective glasses, gloves, and safety helmets must be worn during operation to prevent the saw blade from breaking and splashing, causing personal injury.
- When installing an alloy saw blade, you must first confirm the performance and purpose of the saw table, and read the saw table instructions first to avoid accidents caused by incorrect installation.
- When installing an alloy saw blade, you must confirm that the saw table core shaft size and radial circular runout accuracy are qualified, and that the end face circular runout accuracy of the mounting flange is qualified to avoid damaging the saw blade.
- The teeth of the alloy saw blade are super hard and sharp. It is prohibited to collide or drop to the ground. It must be handled with care.
- After installing the alloy saw blade, you must confirm whether the center hole of the saw blade is firmly fixed on the flange of the saw table. If there is a gasket, you must put the gasket in place, and then gently push the saw blade with your hand to confirm the saw blade. Is the rotation shaking eccentrically?
- The cutting direction indicated by the arrow of the alloy saw blade must be aligned with the rotation direction of the saw table. It is strictly prohibited to install it in the opposite direction. Installation in the wrong direction will cause tooth loss.
- During use, the speed should be kept within the specified range, and overspeeding is prohibited.
- During use, the environment should be kept dry to avoid moisture, metal dust and other contaminants from affecting the performance and service life of the alloy saw blade.
- During use, the wear of the alloy saw blade should be checked regularly. If serious wear or damage is found, it should be replaced in time.
- During use, avoid collision or falling of the carbide saw blade with hard objects to avoid damage or personal injury.
In short, using carbide saw blades correctly and paying attention to safety issues can extend their service life and avoid accidental injuries.
More details of tungsten carbide product, please visit website: http://tungsten-carbide.com.cn/
Please contact CHINATUNGSTEN for inquiry and order of tungsten carbide:
Email: sales@chinatungsten.com
Tel.: 86 592 5129595
